card_1 Copy Protection Module

The card_1 system can only be run in connection with a copy protection module (USB port). By using a copy protection module, each card_1 installation is assigned a unique serial number.

This number can be found on the sticker on the copy protection module. It is a combination of the client number and the workstation number. The last two digits of the serial number represent the number of the card_1 workstation. Please note this workstation number before starting the installation, as you are prompted for this number during the installation.

A separate installation of special driver software is required to ensure that the card_1 system can detect the copy protection module during the installation. card_1 Version 10.0 requires at least version 7.5.0 of the copy protection driver software.

During the installation of the card_1 system the installation program will check whether the driver software is already installed. If the driver software cannot be detected, the driver’s installation program is automatically launched.

You are also notified should your driver software be outdated. In this case you need to update the driver software installed. You will find the installation of the copy protection module software in the main menu of the installation program under 'Further Installations'.